What is welding
Welding is a joining process in which
metals, or sometimes plastics, are heated, melted and mixed to produce a joint
with properties similar to those of the materials being joined.
There are three main components
needed to create a weld. These are:
- A heat source such as an electric arc, a flame, pressure, or friction. The most common heat source is an electric arc. An arc is the physical gap between the end of the electrode and the base metal. The physical gap causes heat due to resistance of current flow and arc rays. The arc melts the metals to create the joint.
- Shielding, which is the use of gas, or another substance to protect the weld from air as the weld is being formed. Oxygen from the air makes welds brittle and porous.
- Filler material, which is the material used to join to the two pieces together.
- Brazing is the joining of metals with a filler metal having a melting point above 450°C (842°F), but below the melting point of base metals.
- Soldering is the joining of metals using a filler metal with a melting point below 450°C (842°F). The joined metals can be different metals. The "filler"metals commonly used are lead-tin alloys.
Is there more than one
type of welding process?
There are over 70 different welding
processes. The most common of which are:
- Shielded Metal Arc Welding (SMAW), also known as Manual Metal Arc Welding, MMAW.
- Gas Tungsten Arc Welding (GTAW) or Tungsten Inert Gas (TIG) Welding.
- Flux Cored Arc Welding (FCAW).
- Gas Metal Arc Welding (GMAW), also known as Metal Inert Gas (MIG) Welding or hard wire welding.
- Plasma Arc Welding (PAW), Plasma Arc Cutting (PAC) and Gouging
- Submerged Arc Welding (SAW)
- Resistance Welding (RW) or spot welding.
- Air Carbon Arc Cutting and Gouging
- Oxyfuel Welding, Cutting and Heating (oxygen-acetylene [oxyacetylene] or oxygen-propane [oxy-propane] mixtures are the most common fuel mixtures used).
In general, Whatare the
hazards associated with welding?
 |
